Advice on blowing fiber with fiber optic cable blowing machines

Fiber optic cables are essential components for providing high-speed internet, television, and phone services. These cables are responsible for transmitting information from one point to another at lightning-fast speeds, making them an indispensable part of modern communication infrastructure. To install fiber optic cables, the process of blowing fiber optic cable with fiber optic cable blowing machines is used. In this article, we will explore the best advice on blowing fiber optic cables with fiber optic cable blowing machines.

1. 

   Understand the cable and pipe diameter

Before you begin the process of blowing fiber optic cables, you need to understand the cable and pipe diameter. It is essential to know the size of the cable and the diameter of the pipe you will be using to install it. This information will help you choose the right blowing machine and accessories for the job. Fiber optic cable blowing machines come in different sizes and capacities, and selecting the right one will ensure a successful installation.

2. Use the right air pressure

One of the critical factors to consider when blowing fiber optic cables is the air pressure. Using the right air pressure will help ensure a smooth and safe installation. It is essential to use the recommended air pressure for the cable and pipe diameter. If the pressure is too low, the cable may not blow through the pipe, and if it is too high, it may cause damage to the cable.

3. Understand the duct installation

Duct installation is a critical aspect of the cable blowing process. You need to make sure that the duct is properly installed and is free of any obstructions. The duct should be free of any debris, and there should be no sharp bends or curves. It is also essential to ensure that the duct is the correct size for the cable being installed.

4. Use a microduct for better results

Using a microduct can make the process of blowing fiber optic cables easier and more efficient. Microducts are smaller in diameter and require less air pressure to blow cables through. They also allow for the installation of multiple cables in a single duct, which can save time and money.

5. Consider the blowing speed and distance

When blowing fiber optic cables, it is essential to consider the blowing speed and distance. Blowing too fast or too far can cause damage to the cable, while blowing too slow or short may not push the cable all the way through the duct. You need to find the right balance between blowing speed and distance for a successful installation.

6. Hire experienced telecom contractors

If you are not experienced in blowing fiber optic cables, it is essential to hire experienced telecom contractors. These contractors have the necessary knowledge and equipment to ensure a successful installation. They can help you choose the right fiber optic cable blowing machine and accessories for your specific project.

7. Use a high-quality compressor

Using a high-quality compressor is essential when blowing fiber optic cables. The compressor should be able to provide a consistent air pressure and flow rate throughout the installation. A low-quality compressor can cause damage to the cable and may result in an unsuccessful installation.

In conclusion, blowing fiber optic cables with fiber optic cable blowing machines is a critical process in the installation of fiber optic cables. Understanding the cable and pipe diameter, using the right air pressure, and considering the duct installation are all essential factors for a successful installation. Using a microduct, hiring experienced telecom contractors, and using a high-quality compressor can also make the process more efficient and effective. By following these tips, you can ensure a successful installation and enjoy the benefits of high-speed internet, television, and phone services.